Find Mini-Split AC Solution

User Guide

Nunc diam quam, volutpat quis auctor ac, suscipit a neque. Maecenas ultrices fringilla elementum. In enim dui, sagittis ac faucibus nec, eleifend at odio. Pellentesque dapibus eros ex, vel eleifend eros vestibulum sit amet. Morbi sit amet sapien sit amet est feugiat pellentesque vel at diam. Pellentesque euismod placerat dui id venenatis. Vestibulum id tristique nunc. Phasellus suscipit tellus maximus, sollicitudin libero ut, dapibus est. Aenean egestas dignissim enim eu consequat.

SYSTEM REQUIREMENTS

Nunc diam quam, volutpat quis auctor ac, suscipit a neque. Maecenas ultrices fringilla elementum. In enim dui, sagittis ac faucibus nec, eleifend at odio. Pellentesque dapibus eros ex, vel eleifend eros vestibulum sit amet.

Zones: Zoning involves configuring the system to heat areas of your home independently.

Voltage: Voltage in the project installation.

Series: Best Fit option let us to choose the series for you in case you don't have information about our series.

Use Multi-Split systems: If not selected we propose single-zone units for each zone, when selected the solution will be based on.. A multi-zone mini split system consists of two or more indoor mini split units which are all connected to a single outdoor unit or compressor. The number of indoor units that you want to connect to a single compressor will largely depend on the number of zones in your home that you would like to heat or cool.

Use 16-20 SEER systems when possible: This is related with the units efficiency.. By default we propose the more efficiency units between 20-23 SEER, but you can set a lower efficiency systems for lower prices at the expense of more electricity consumption.

Include brackets for outdoor units: An mini-splt air conditioner bracket supports the weight of a condenser outdoor unit.

Include DIY accessories:

Include Refrigerant if needed: Our condensers have a pre-charged refrigerant for up to 25 ft but..

ZONES REQUIREMENTS

Nunc diam quam, volutpat quis auctor ac, suscipit a neque. Maecenas ultrices fringilla elementum. In enim dui, sagittis ac faucibus nec, eleifend at odio. Pellentesque dapibus eros ex, vel eleifend eros vestibulum sit amet.

Capacity: Cooling capacity

Mounting:

  • High Wall High Wall: Wall-mounted mini split systems are installed near the top of a wall. They're the most popular mini split option due to being the least expensive choice.
  • Ceiling Cassette Ceiling Cassete: Ceiling cassette mini split systems are installed recessed on the ceiling. Due to their location, they provide a wider air flow than most other types of systems.
  • Ceiling Suspended Ceiling Suspended: Floor-mounted mini splits are essentially the same at wall-mounted mini splits, except they're installed near the bottom of a wall instead of towards the top.
  • Concealed Duct Concealed Duct: Concealed duct mini splits are mounted on the ceiling, typically where they can be connected to one of more ducts.
  • Floor Standing Floor Standing: Floor-mounted mini splits are essentially the same at wall-mounted mini splits, except they're installed near the bottom of a wall instead of towards the top.

Piping Length:

SOLUTION CONFIGURATION

Nunc diam quam, volutpat quis auctor ac, suscipit a neque. Maecenas ultrices fringilla elementum. In enim dui, sagittis ac faucibus nec, eleifend at odio. Pellentesque dapibus eros ex, vel eleifend eros vestibulum sit amet.

Indoors Sections: for Multi-Split

Outdoor Section: for Multi-Split

Systems: System sets .. A single-zone mini split system consists of one outdoor unit for each indoor unit. When heating or cooling multiple zones in a home, an outdoor unit will need to be installed for each individual room.

Accessories:

Add to Cart Button:

Buy Now Button:

Download Button:

Share Button:

SOLUTION NOTES

Nunc diam quam, volutpat quis auctor ac, suscipit a neque. Maecenas ultrices fringilla elementum. In enim dui, sagittis ac faucibus nec, eleifend at odio. Pellentesque dapibus eros ex, vel eleifend eros vestibulum sit amet.

Disclaimer Statement

SAVING CALC
Disclaimer: This calculator is only intented to give you a rough estimate for general informative purposes only. We do not take responsibility for or guarantee any completeness, reliability, or accuracy of this information. There can be several other unique factors in certain applications that significantly affect and even falsify these values. You should always consult a licensed Design Engineer for the most accurate measurements and values.

LOAD CALC
Disclaimer: The recommended BTU loads were determined in good faith and are intended for general informative purposes only. We do not take responsibility for or guarantee any completeness, reliability, or accuracy of this information. There can be several other unique factors in certain applications that significantly affect and even falsify these values. You should always consult a licensed design engineer for the most accurate measurements and values, which can only be truly obtained after a thorough inspection of the job site is performed and all related factors are determined.

MULTI CALC
Every indoor unit attached will operate at a random, self-regulated capacity, based on the actual demand it measures from the zone it is serving (Between 30% to 100% of its rated capacity or OFF). Outdoor unit will also self-regulate its output capacity, based on the total demand it reads from all of the simultaneously running indoor units at any given moment.

With multi split systems, the total demand from the outdoor unit, shall seldomly exceed 77% of the total available capacity of the combined indoor unit group due to load fluctuations. Although very seldom, if and when the total demand from the combined indoor group exceeds the rated capacity of the outdoor unit, the capacity of each indoor unit will be annotated accordingly.

For high demand heating applications, max loading limits may need to be reduced by 10-15 % to avoid underperformance risks at some extreme conditions.

REFRIGERANT CALC
Disclaimer: This calculator is only intented to give you a rough estimate for general informative purposes only. We do not take responsibility for or guarantee any completeness, reliability, or accuracy of this information. There can be several other unique factors in certain applications that significantly affect and even falsify these values. You should always consult a licensed Design Engineer for the most accurate measurements and values.

Allow Scripts!
IF YOU SEE A YELLOW BAR UNDER YOUR ADDRESS BAR YOU MUST CLICK IT TO ALLOW SCRIPTS. This script will not harm your computer and does not log any information about you. You must have JavaScript enabled in your browser to use this tool.

Need help? Call us at (800) 675-7410